 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| *Customer: SPECIFICATION ITEM MODEL PART NO. CHIP LED DEVICE SSC-HBTS901 [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Lot Number 5. Soldering profile 6. Outline dimension 7. Packing 8. Reel packing structure 9. Precaution for use 10. Characteristic Diagram 11. Reliability Customer Checked by Approved by Supplier Drawn by Checked by Approved by SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 1/10 1. Features Package : 2.8 x 1.2 x 1.0 mm Tape and reel packing 2. Absolute Maximum Ratings Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFM*1 VR Topr Tstg Value 120 30 100 5 - 30 ~ +85 - 40 ~ +100 (Ta=25) Unit V *1 IFM conditions: Pulse width Tw 0.1ms, Duty ratio 1/10 Care is to be taken that Power Dissipation does not exceed the Absolute Maximum Rating of the product. 3. Electro-Optical Characteristics Parameter Forward Voltage Reverse Current Luminous Intensity*1 Dominant Wavelength Spectral Bandwidth 50% Viewing Angle *2 Symbol VF IR IV Condition IF =20mA VR =5V IF =20mA IF =20mA IF =20mA Min 60 Typ 3.6 100 465 24 120 Max 4.0 10 - (Ta=25C) Unit V A mcd nm nm deg. d 21/2 *1 The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is 10%. *2 21/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. Note : All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 2/10 4. Lot Number The lot number is composed of the following characters; HBTS - Year ( 3 for 2003, 4 for 2004, 5 for 2005 ) - Month ( 01 for Jan., 02 for Feb.,11 for Nov., 12 for Dec.) - Day ( 01, 02, 03, 04, 28, 29, 30, 31.) - Number of Tray ( 001, 002, 003, 004, 005, 006, .) SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 3/10 5. Soldering Profile The LED can be soldered in place using the reflow soldering method. (1) Lead solder Preliminary heating to be at maximum 210C for maximum 2 minutes. Soldering heat to be at maximum 240C for maximum 10 seconds. 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 o 0 15 30 45 60 75 90 105 120 135 150 165 180 195 (2) Lead-free solder Soldering Times [sec] Preliminary heating to be at maximum 220C for maximum 2 minutes. Soldering heat to be at maximum 260C for maximum 10 seconds. 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 o Soldering Times [sec] (3) Hand Soldering conditions Not more than 5 seconds @MAX300C, under Soldering iron. In case the soldered products are reused in soldering process, we don't guarantee the products. SSC-HBTS901 SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/10 6. Outline Dimension ( Tolerance: 0.2, Unit: ) MOLD GATE A A' < Cathode Anode SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 5/10 7. Packing Anode C a th o d e ( Tolerance: 0.2, Unit: ) (1) Quantity : 3500pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 6/10 8. Reel Packing Structure Reel RANK : QUANTITY : XXXX XXX LOT NUMBER : XXXXXXXXXX SSC PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. Aluminum Vinyl Bag RANK : QUANTITY : XXXX XXX LOT NUMBER : XXXXXXXXXX SSC PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 142 1 SIDE c 1 RANK : QUANTITY : XXXX XXX TOP LED b a LOT NUMBER : XXXXXXXXXX SSC PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 7/10 9. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5~30 (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40 Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 605. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 805 or 12Hr at 1005. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. Humidity : 60%HR max. SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 8/10 10. Characteristic Diagram Forward Current vs Forward Voltage 250 o Intensity vs Forward Current o Ta=25 C 200 Ta=25 C Forward Current IF [mA] Intensity IV [mcd] 2.7 3.0 3.3 3.6 3.9 4.2 4.5 10 150 100 50 1 0 0 10 20 30 40 50 Forward Voltage VF [V] Forward Current IF [mA] Forward Current Derating Curve 35 30 Radiation Diagram Forward current IF (mA) 25 20 15 10 5 0 -25 0 25 50 75 100 Ambient temperature Ta() SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 9/10 11. Reliability (1) TEST ITEMS AND RESULTS TEST ITEM Resistance to Soldering Heat Thermal Shock High Temperature Life Test Humidity Heat Load Low Temperature Storage Life Test High Temperature Storage High Humidity Heat Life Test Low Temperature Life Test Solderability (Reflow Soldering) Temperature Cycle Moisture Resistance Cycle Test conditions Tsld=240C, 5sec. Pre treatment 85,85%,72hrs -30C ~ 85C 30min. 30min. Ta=85C; IF=5mA Ta=85C; RH=85% Ta=-30C Ta=25C; IF=20mA Ta=100C Ta=60C; RH=90%, IF=15mA Ta=-30C; IF=20mA Tsld=2155C, 3sec. (Lead Solder) -40C~25C~100C~25C 30min. 5min. 30min. 5min. 25C~65C~-10C RH=90%, 24hrs./1cycle Note 2 Times 20 cycles 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. 500 hrs. 1000 hrs. 1 Time over 95% 100 hrs. 10 cycles Number of Damaged 0/50 0/50 0/20 0/50 0/50 0/20 0/50 0/20 0/20 0/50 0/50 0/50 (2) CRITERIA FOR JUDGING THE DAMAGE Criteria for Judgment Min. L.S.Lx0.5 Max. U.S.Lx1.2 U.S.Lx2.0 - Item Forward Voltage Reverse Current Luminous Intensity Symbol VF IR IV Test Condition IF=20mA VR=5V IF=20mA U.S.L. : Upper Standard Level L.S.L. : Lower Standard Level SSC-QP-0401-06 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-HBTS901 - 10/10 |
Price & Availability of SSC-HBTS901
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |